Home : Dalrun : T Slot :
First up is a 2 x 2 x 1/4" base for mounting 102-B toggle clamps to 15 series extrusions. The clamp can be mounted inline with the extrusion, or perpendicular to it. When perpendicular, it can be aligned with the front or back of the extrusion. The knurled screws make the clamp easy to move and reconfigure. The t-slot nuts are 3/8 stainless and all mounting screws are m5 (a hair bigger than #10-32) stainless. Two available. $32 each set. All sets include 1 base, 1 t-slot nut, 4 clamp mounting screws and 2 knurled base mounting screws.
The smallest 102-B toggle clamp base is 1-1/4 x 2 x 1/4". It is available with an inline mount for 10 or 15 series extrusions, or with a perpendicular mount for 10 series extrusions (diff is tapped hole locations). The perpendicular mount can be flush to the face of the extrusion, or overhang the face (requires rotating the clamp on the base). All stainless and aluminum with the exception of the 10 series t-slot nut (drill rod). Two inline available, one perpendicular. $28 each set.
The smallest 101-D base is an inline 15 series base that measures 1-3/4 x 2-1/2 x 1/4. All components are stainless steel and aluminum. All mounting screws are m6 (a bit smaller than 1/4). Two available. $30 each set, $22 w/ black steel base mounting screws (no knurled standoff).
If there is interest, I will add bases for horizontal clamps, e.g. 201-C and/or 225-D, and thicker plate options, e.g. 3/8 and 1/2". Custom base orders are also welcome, minimum 4 pieces (stock prices).
See also: Toggle Clamps
T-slot Toggle Clamp Bases
First up is a 2 x 2 x 1/4" base for mounting 102-B toggle clamps to 15 series extrusions. The clamp can be mounted inline with the extrusion, or perpendicular to it. When perpendicular, it can be aligned with the front or back of the extrusion. The knurled screws make the clamp easy to move and reconfigure. The t-slot nuts are 3/8 stainless and all mounting screws are m5 (a hair bigger than #10-32) stainless. Two available. $32 each set. All sets include 1 base, 1 t-slot nut, 4 clamp mounting screws and 2 knurled base mounting screws.The smallest 102-B toggle clamp base is 1-1/4 x 2 x 1/4". It is available with an inline mount for 10 or 15 series extrusions, or with a perpendicular mount for 10 series extrusions (diff is tapped hole locations). The perpendicular mount can be flush to the face of the extrusion, or overhang the face (requires rotating the clamp on the base). All stainless and aluminum with the exception of the 10 series t-slot nut (drill rod). Two inline available, one perpendicular. $28 each set.
The smallest 101-D base is an inline 15 series base that measures 1-3/4 x 2-1/2 x 1/4. All components are stainless steel and aluminum. All mounting screws are m6 (a bit smaller than 1/4). Two available. $30 each set, $22 w/ black steel base mounting screws (no knurled standoff).
If there is interest, I will add bases for horizontal clamps, e.g. 201-C and/or 225-D, and thicker plate options, e.g. 3/8 and 1/2". Custom base orders are also welcome, minimum 4 pieces (stock prices).
See also: Toggle Clamps
