There can be a lot of hardware involved in 32mm Cabinetmaking. This area is for technical and application specific hardware information. Sometimes you have to use what you have and sometimes you find ways to use hardware that never occurred to the designer.
NOTE: This category needs a lot of work, it currently contains just a few random entries.
Subcategories: Connectors Shelves
I've tried every leg/toe-kick method these knock-in levelers are my current preference for notched panels.
Notes: The bottom mounting hole and the box bottom adjusting hole (both 10mm) can both be bored 17mm from the edge. If your box assembly involves fasteners in line with system rows, shifting the mounting holes back 16mm works well.
Hafele catalog entry
[ comment | link | top ]